Back to Laboratory Directory
Makmal Sains Bahan

Makmal Sains Bahan

Room C002
Anuar bin Ismail Anuar bin Ismail · pic02@uthm.edu.my ·
Login with an external account or contact the PIC directly.
Choose a service below to activate the correct equipment set for booking.

Available Services & Equipment

Choose a service to activate booking. Equipment inventory linked to each service is shown below.

5 Services
Grindng for Metalography
MATERIALS CHARACTERIZATION
Models: BUEHLER SIMPLIMET
Calibration: Unknown
Acceptance criteria: Use mounted specimens not exceeding 30 mm in diameter
Grindng for Metalography - BUEHLER SIMPLIMET
Grindng for Metalography - BUEHLER SIMPLIMET
MATERIALS CHARACTERIZATION
Available ×1
Required for service: 1
This service will drive equipment and slot selection.
Metalography Examination
MATERIALS CHARACTERIZATION
Models: Metalography Examination x1
Calibration: Unknown
Acceptance criteria: Only specimens that have been etched are allowed. / Available magnification: 50x, 100x, 200x, and 1000x / Specimens must be flate
Metalography Examination
Metalography Examination
MATERIALS CHARACTERIZATION
Available ×1
Required for service: 1
This service will drive equipment and slot selection.
Mounting for Metalography
MATERIALS CHARACTERIZATION
Models: METKON ECOPRESS 52
Calibration: Unknown
Acceptance criteria: 1) Only for samples that are solid and strong with: / - heat-resistant above 180°C and / - pressure-resistant above 300 kg/cm2 (> 294.2 bar). / 2) Maximum sample size: / - Cubic specimen: 15 mm (L) × 15 mm (W) × 13 mm (H) / - Cuboid specimen: 25 mm (L) × 10 mm (W) × 13 mm (H) / - Cylindrical specimen: 25 mm (Dia) × 13 mm (H)
Mounting for Metalography - METKON ECOPRESS 52
Mounting for Metalography - METKON ECOPRESS 52
MATERIALS CHARACTERIZATION
Available ×1
Required for service: 1
This service will drive equipment and slot selection.
Polishing for Metalography
MATERIALS CHARACTERIZATION
Models: METKON FORCIPOL / BUEHLER
Calibration: Unknown
Acceptance criteria: Use mounted specimens not exceeding 30 mm in diameter
Polishing for Metalography - METKON FORCIPOL / BUEHLER
Polishing for Metalography - METKON FORCIPOL / BUEHLER
MATERIALS CHARACTERIZATION
Available ×1
Required for service: 1
This service will drive equipment and slot selection.
Sectioning for Metalography
MATERIALS CHARACTERIZATION
Models: METKON METACUT 302
Calibration: Unknown
Sectioning for Metalography - METKON METACUT 302
Sectioning for Metalography - METKON METACUT 302
MATERIALS CHARACTERIZATION
Available ×1
Required for service: 1
This service will drive equipment and slot selection.

How to Book This Laboratory

You can browse equipment and view availability, but direct booking is reserved for UTHM users. Login with an external account to submit a request, or contact the PIC first.

Availability is calculated from the selected service and its linked equipment, and may vary between timeslots.

Login to Submit a Request

Laboratory Availability

Choose a service above to load its linked equipment and real-time availability. Click on any date to see available timeslots. Note: Equipment can still be booked when some units remain available, even if other units are under maintenance.